DSE2541
Remote Battery Charger Display Module
The DSE2541 Remote Battery Charger Display Module has been designed to work with all intelligent and enclosed battery chargers. The module displays information to the operator on charge output, charge cycle, mains (utility) supply status and indicates when fault conditions are present.
OVERALL SIZE
140 mm x 113 mm x 43 mm (5.5” x 4.4” x 1.7”)
PANEL CUTOUT SIZE
118 mm x 92 mm (4.6” x 3.6”)
MAXIMUM PANEL THICKNESS
8.0mm (0.3”)
WEIGHT
0.24kg
PRODUCT VARIANTS
2541-02 - 2541 Remote Battery Charger Display Module
140 mm x 113 mm x 43 mm (5.5” x 4.4” x 1.7”)
PANEL CUTOUT SIZE
118 mm x 92 mm (4.6” x 3.6”)
MAXIMUM PANEL THICKNESS
8.0mm (0.3”)
WEIGHT
0.24kg
PRODUCT VARIANTS
2541-02 - 2541 Remote Battery Charger Display Module
SPECIFICATION
DC SUPPLY
CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.
MAXIMUM OPERATING CURRENT
80 mA at 12 V, 75 mA at 24 V
MAXIMUM STANDBY CURRENT
65 mA at 12 V, 60 mA at 24 V
FAULT OUTPUT
3 A at 30 V DC volt-free relay
