Features

The Minitube Plastic Series of duct mounted axial fans is suitable for applications ranging from domestic to commercial ventilation.

Construction
All models have a powder-coated galvanised steel fan impeller.
Casing: - 'MTP' range: ABS plastic casing.

Motors
Type - external rotor, squirrel cage induction motor.
Electricity supply - 220-240V, single-phase, 50/60Hz.
Bearings sealed-for-life, ball.
Speed-controllable.
Motor protection IP44.
If flameproof motors for hazardous locations are required, refer to Compact Miniduct Series.

Internal Thermal Protection
Manual reset type fitted as standard on models 202 and above.
Model 132 is protected by an internal fuse.

Testing
Air flow tests to ISO5801:2004
Noise tests to BS848:Part 2, 1985

Special Features
Can be mounted at any angle.
Tapered ends on 'MTP' range allows standard sized duct to slide on easily

The fans shall be of the Minitube Series designed and manufactured by Fantech Pty. Ltd. The axial impellers shall be direct driven by speed-controllable external rotor motors with integral thermal protection.

The casings shall be manufactured from ABS plastic with mounting brackets as an integral component. The impellers shall be manufactured from galvanised steel with a powder-coat finish.

All models shall be fully tested to ISO5801:2004 for air flow and BS848:Part 2, 1985 for noise in fully certified laboratories.

Speed [rps]	Avg. dBA @ 3m	kWatts (Input)	Amps	Max.°C	Approx. Weight [kg]
47	43	0.046	0.3	80	1.5